{"product_id":"mookeerf-rg6-coaxial-cable-200ft-18awg-75ω-dual-shield","title":"MOOKEERF RG6 Coaxial Cable 200ft 18AWG 75Ω Dual Shield","description":"\u003cstrong\u003eMOOKEERF RG6 200FT coaxial cable is a dual-shield, 18 AWG pure copper 75Ω cable built for long runs and high-frequency signal delivery in broadcast, satellite, cellular, and CCTV setups.\u003c\/strong\u003e\n\n\u003cp\u003eThis 200-foot RG6 coax from MOOKEERF combines a solid 18 AWG pure copper conductor with a 100% foil plus 60% braided shield to keep interference low across long distances. The PVC jacket offers flexibility and weather resistance so the cable can be routed indoors or outdoors for home entertainment, professional installations, or security systems. Sweep-tested performance up to 6 GHz makes it suitable for many modern RF tasks without unnecessary bulk or fragile construction.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable maintain a clean signal over long runs?\u003c\/h3\u003e\n\u003cp\u003eThe MOOKEERF RG6 uses a thick 18 AWG pure copper center conductor and a dual-layer shield—100% foil plus a 60% braid—that together reduce signal loss and reject EMI\/RFI. This construction stabilizes impedance at 75 ohms, which helps preserve quality on extended runs and through multiple connectors or splitters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18 AWG pure copper core for lower resistance and better conductivity\u003c\/li\u003e\n  \u003cli\u003e100% aluminum foil provides full coverage to block high-frequency interference\u003c\/li\u003e\n  \u003cli\u003e60% braided shield adds mechanical strength and extra noise rejection\u003c\/li\u003e\n  \u003cli\u003eSweep-tested to high frequencies for reliable broadband performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this cable suitable for outdoor or exposed installations?\u003c\/h3\u003e\n\u003cp\u003eThe cable’s outer jacket is flexible PVC that resists abrasion, moisture, and typical environmental wear. While PVC jackets are robust for standard outdoor routing and entry points, permanent burial requires a dedicated direct-burial or gel-filled cable designed specifically for underground use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible PVC jacket for easy routing around corners and through conduits\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant exterior for temporary outdoor runs and roof routing\u003c\/li\u003e\n  \u003cli\u003eNot intended as a substitute for direct-burial rated cable\u003c\/li\u003e\n  \u003cli\u003ePairs well with weatherproof connectors and entry grommets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich devices and systems will this RG6 cable work with?\u003c\/h3\u003e\n\u003cp\u003eMOOKEERF RG6 is designed for a broad range of 75Ω RF applications, including satellite dishes, cable TV, over-the-air antennas, CCTV cameras, and cellular signal amplifiers. Its high-frequency capability and sturdy shielding also make it a good choice for multi-socket distribution and long-distance links in home and light-commercial installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatellite receivers and cable set-top boxes\u003c\/li\u003e\n  \u003cli\u003eCCTV cameras and DVR\/NVR connections\u003c\/li\u003e\n  \u003cli\u003eOver-the-air antennas and signal boosters\u003c\/li\u003e\n  \u003cli\u003eBroadcast and cellular test or temporary feed runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about connectors, handling, and installation?\u003c\/h3\u003e\n\u003cp\u003eThis cable accepts standard F-type and other 75Ω connectors; proper crimping or compression greatly improves signal reliability. Avoid excessive kinks, sharp bends, or heavy crushing forces near connectors to preserve impedance and shielding integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse quality F-type compression or crimp connectors for best contact\u003c\/li\u003e\n  \u003cli\u003eMaintain gentle bend radius to prevent conductor deformation\u003c\/li\u003e\n  \u003cli\u003eTrim dielectric cleanly for consistent connector fit and shielding contact\u003c\/li\u003e\n  \u003cli\u003eLabel long runs and test signal levels after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, AV hobbyists, and anyone needing a reliable 75Ω feed for long runs — MOOKEERF RG6 200FT is aimed at users who require durable shielding, pure copper conductivity, and flexible routing for satellite, cable TV, CCTV, and cellular or broadcast experiments. If you want a quality RG6 that balances performance, flexibility, and weather resistance for typical indoor and many outdoor routing needs, this cable is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bury this RG6 cable directly underground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This PVC-jacketed RG6 is weather-resistant but not rated for direct burial; use direct-burial cable for underground runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this cable work with my satellite receiver?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 75Ω MOOKEERF RG6 with pure copper conductor is compatible with most satellite receivers and LNB connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48413407674525,"sku":"B0FR4C9PZJ","price":78.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-front-coil.jpg?v=1781263890","url":"https:\/\/nexoltic.com\/products\/mookeerf-rg6-coaxial-cable-200ft-18awg-75%cf%89-dual-shield","provider":"Nexoltic","version":"1.0","type":"link"}