{"product_id":"mookeerf-rg58-bnc-male-to-male-coax-cable-75ft-50ω","title":"MOOKEERF RG58 BNC Male-to-Male Coax Cable 75ft 50Ω","description":"\u003cp\u003e\u003cstrong\u003eMOOKEERF 75ft RG58 BNC male-to-male coaxial cable is a 50‑ohm, low‑loss lead designed to deliver reliable RF connections for radios, scanners, and antenna extensions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy‑duty 75‑foot RG58 cable combines a solid copper center conductor with a layered outer shield and reinforced connector joints to preserve signal integrity across longer runs. Engineered for 50‑ohm systems, it keeps return loss and standing‑wave ratio low at common VHF\/UHF frequencies while resisting environmental wear with a weatherproof PVC jacket and plated connector shells.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable limit signal loss over 75 feet?\u003c\/h3\u003e\n\u003cp\u003eThe MOOKEERF RG58 assembly is configured to minimize attenuation and reflections so your transceiver or receiver keeps usable signal strength at the far end. Tested performance shows loss under 5.9 dB at 450 MHz with an SWR of 1.2 or better, making it suitable for many two‑way radio and scanner applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 ohm impedance tuned for radio and antenna matching\u003c\/li\u003e\n  \u003cli\u003eMeasured attenuation: \u0026lt;5.9 dB at 450 MHz\u003c\/li\u003e\n  \u003cli\u003eSWR ≤ 1.2 to reduce returned power and standing waves\u003c\/li\u003e\n  \u003cli\u003e75 ft length for flexible antenna placement without extra joins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction improve durability and shielding?\u003c\/h3\u003e\n\u003cp\u003eThis coax uses a solid copper center conductor for consistent conductivity, wrapped with bonded aluminum foil and a tinned‑copper braid that together lower EMI and prevent leakage. The outer PVC jacket is both flexible and water resistant, while nickel‑plated copper connector shells resist corrosion in outdoor environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid copper inner conductor for steady signal transfer\u003c\/li\u003e\n  \u003cli\u003eBonded aluminum foil + tinned copper braid for multi‑layer shielding\u003c\/li\u003e\n  \u003cli\u003ePVC outer jacket: flexible, waterproof, and abrasion resistant\u003c\/li\u003e\n  \u003cli\u003eCopper nickel plated BNC shells for oxidation resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are the connectors reinforced to prevent pull‑offs?\u003c\/h3\u003e\n\u003cp\u003eMOOKEERF attaches each BNC male connector with a longer adhesive heat‑shrink sleeve (approx. 2.2 inches) that forms a durable strain relief at the cable‑to‑connector junction. That extra reinforcement reduces the chance of the connector separating during installation, handling, or when used with adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.2\" adhesive heat‑shrink for secure junctions\u003c\/li\u003e\n  \u003cli\u003eProfessional crimp and bonding to resist pullout\u003c\/li\u003e\n  \u003cli\u003eCompatible with common BNC male ports and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich devices and setups work best with this RG58 BNC cable?\u003c\/h3\u003e\n\u003cp\u003eThe cable is intended for 50‑ohm RF systems and pairs well with CB\/ham radios, two‑way radios, antenna receivers and scanners. Its length and weather‑resistant build make it useful for fixed installations, temporary masts, or as an antenna extension where an off‑the‑shelf BNC link is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCB and amateur (ham) radio transceivers\u003c\/li\u003e\n  \u003cli\u003eRadio scanners, receivers, and antenna extensions\u003c\/li\u003e\n  \u003cli\u003eTwo‑way radios and portable base stations using BNC\u003c\/li\u003e\n  \u003cli\u003eOutdoor or rooftop antenna runs where weather resistance matters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, hobbyist radio operators, and anyone needing a dependable 75‑foot BNC‑terminated 50‑ohm cable will find MOOKEERF’s RG58 option practical: it balances manageable attenuation, layered shielding, and ruggedized connector joints for demanding RF runs. Choose this cable when you want a ready‑to‑use, weather-capable link between radios and antennas without fabricating custom connectors or worrying about early connector failure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable suitable for ham radio and scanners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is a 50Ω RG58 BNC cable suited to ham radios, CB, scanners, and antenna extensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it outdoors without extra protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the PVC jacket and nickel‑plated connectors are weather resistant for typical outdoor installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48436949975197,"sku":"B0B87R26F2","price":59.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-bnc-75ft-full-length.jpg?v=1781456857","url":"https:\/\/nexoltic.com\/products\/mookeerf-rg58-bnc-male-to-male-coax-cable-75ft-50%cf%89","provider":"Nexoltic","version":"1.0","type":"link"}