{"product_id":"mookeerf-rg58-75ft-sma-male-to-male-50ω-cable","title":"MOOKEERF RG58 75ft SMA Male-to-Male 50Ω Cable","description":"\u003cstrong\u003eMOOKEERF RG58 75-foot SMA male-to-male cable is a low-loss 50Ω extension designed to carry RF signals for antennas, radios, GPS, and Wi‑Fi with durable shielding and rugged outdoor protection.\u003c\/strong\u003e\n\nThis 75 ft SMA-to-SMA extension gives you long-range connectivity for RF projects and antenna installations without repeatedly swapping devices. Built with a solid-copper center conductor, aluminum foil and tinned-copper braid shielding, and a PVC outer jacket, the cable balances flexibility with protection against EMI\/RFI and everyday outdoor exposure. It’s intended for hobbyists and professionals who need a reliable, low-loss cable between radios, analyzers, and external antennas.\n\n\u003ch3\u003eHow does this cable reduce signal loss over long runs?\u003c\/h3\u003e\n\u003cp\u003eThe RG58 construction uses a solid copper inner conductor and dense tinned-copper braid to preserve signal integrity over extended distances. The cable is specified at 50 ohms and engineered for low VSWR to keep reflected energy minimal across common RF bands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid copper center conductor for consistent conductivity\u003c\/li\u003e\n  \u003cli\u003eAluminum foil plus tinned-copper braid for over 95% shielding\u003c\/li\u003e\n  \u003cli\u003eDesigned VSWR ≤ 1.15 to minimize reflections\u003c\/li\u003e\n  \u003cli\u003eOptimized for 3G\/4G\/LTE, GPS, Wi‑Fi and other RF applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectors and mechanical protections are included?\u003c\/h3\u003e\n\u003cp\u003eEach end terminates in standard SMA male connectors for straightforward mating with antennas, radios, and test equipment. The connector junctions are reinforced with an extended 2.2-inch heat-shrink sleeve that reduces the chance of the connector separating from the cable under tension or movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSMA male to SMA male termination — universal fit for SMA female ports\u003c\/li\u003e\n  \u003cli\u003e2.2\" heat-shrink reinforcement for stronger strain relief\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined connectors for repeatable mating\u003c\/li\u003e\n  \u003cli\u003eSuitable for frequent connect\/disconnect cycles and field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this cable be used outdoors and near interference sources?\u003c\/h3\u003e\n\u003cp\u003eThe outer PVC jacket is flexible and weather-resistant for exposed installations, while the multi-layer shielding offers strong protection from EMI and RFI common near routers, power lines, or industrial equipment. The waterproof jacket and high-density braid support deployments where occasional moisture or harsh conditions occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable PVC jacket resists UV, moisture, and abrasion\u003c\/li\u003e\n  \u003cli\u003e95%+ shielding effectiveness reduces external interference\u003c\/li\u003e\n  \u003cli\u003eFlexible enough for routing through conduits or around corners\u003c\/li\u003e\n  \u003cli\u003eAppropriate for rooftop antenna runs, vehicle rigs, and outdoor radios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich devices and test tools is this cable compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 75-ft RG58 SMA cable works with a broad range of RF and instrumentation equipment that accept SMA male connectors and a 50Ω coaxial interface. It’s widely used for connecting external antennas, signal generators, analyzers, and wireless radios during installation and diagnostic tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal Wi‑Fi and cellular antennas (3G\/4G\/LTE)\u003c\/li\u003e\n  \u003cli\u003eGPS antennas and positioning modules\u003c\/li\u003e\n  \u003cli\u003eRF Explorer, VNA, SWR meters, antenna\/spectrum analyzers\u003c\/li\u003e\n  \u003cli\u003eWireless LAN devices, signal generators, and test benches\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis MOOKEERF RG58 75-ft SMA cable is tailored for installers, RF technicians, ham radio operators, IoT integrators, and hobbyists who need a long, dependable 50Ω extension between equipment and antennas. If you require a balance of low-loss performance, robust shielding, and outdoor-ready construction for field deployments or lab testing, this cable is a practical choice. MOOKEERF backs the product with professional manufacturing standards and customer support if you encounter issues.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable compatible with my SMA female antenna?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — both ends are SMA male and will mate with standard SMA female antenna or device ports on 50Ω equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this cable outdoors long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PVC jacket and high-density shielding are designed for occasional outdoor exposure and resist moisture and UV.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48413581901981,"sku":"B0FN41CY9X","price":55.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-front-sma-connector.jpg?v=1781272565","url":"https:\/\/nexoltic.com\/products\/mookeerf-rg58-75ft-sma-male-to-male-50%cf%89-cable","provider":"Nexoltic","version":"1.0","type":"link"}