{"product_id":"mookeerf-rg11-50ft-low-loss-coax-cable-14awg","title":"MOOKEERF RG11 50ft Low-Loss Coax Cable 14AWG","description":"\u003cp\u003e\u003cstrong\u003eMOOKEERF RG11 50ft coaxial cable is a heavy-duty, low-loss 75Ω cable with a 14 AWG center conductor and F-type connectors designed for long runs to deliver clearer TV, satellite, and antenna signals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 50-foot RG11 cable from MOOKEERF pairs a thicker 14 AWG conductor with dual shielding (100% foil + 60% braid) and weather-resistant jacketing to preserve signal quality across extended distances. It’s built for indoor and outdoor installations where minimizing attenuation matters — for rooftop satellite feeds, long cable runs to DVRs, or antenna connections in mobile and fixed setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this RG11 cable reduce signal loss on long runs?\u003c\/h3\u003e\n\u003cp\u003eRG11 has a larger conductor and different electrical characteristics than RG6, which lowers attenuation across higher frequencies and long distances. The MOOKEERF model combines that physical advantage with higher shielding coverage to reduce interference and maintain consistent levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14 AWG solid center conductor for improved current handling and lower resistance\u003c\/li\u003e\n  \u003cli\u003eDual shielding: 100% aluminum foil plus 60% braid for EMI\/RFI protection\u003c\/li\u003e\n  \u003cli\u003e75 ohm impedance matched for CATV, satellite and antenna systems\u003c\/li\u003e\n  \u003cli\u003eOptimized for long runs where RG6 would show noticeable loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the connectors and jacket survive outdoor installations?\u003c\/h3\u003e\n\u003cp\u003eYes — the cable comes with factory-mounted F-type connectors made to resist pulling and signal loss, and the PVC jacket is UV resistant for outdoor exposure. That combination keeps the connection stable through temperature swings and typical weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed, high-quality F-type connectors reduce installation errors\u003c\/li\u003e\n  \u003cli\u003eUV-resistant PVC jacket for sunlight and outdoor durability\u003c\/li\u003e\n  \u003cli\u003eConnector crimps and strain relief designed to prevent separation\u003c\/li\u003e\n  \u003cli\u003eSuitable for rooftop, mast, and wall-fed cable routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat devices and systems is this cable compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 75Ω RG11 cable is intended for devices and systems requiring low-loss coaxial connections: satellite dishes, CATV distribution, VHF\/UHF antennas, DVRs, and radio equipment. It works where a thicker cable is needed to preserve signal integrity over distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatellite dish and LNB connections for better long-run performance\u003c\/li\u003e\n  \u003cli\u003eCATV and cable TV distribution lines to amplifiers and set-top boxes\u003c\/li\u003e\n  \u003cli\u003eAntenna runs for VHF\/UHF and over-the-air TV reception\u003c\/li\u003e\n  \u003cli\u003eRadio and amplifier interconnects in commercial or residential installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with coax: the cable arrives with F-type connectors pre-attached, so you typically only need to route and tighten. Keep bends gradual, avoid sharp kinks, and use correct mounting hardware to prevent strain on connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a proper wrench to snug F-connectors; avoid overtightening\u003c\/li\u003e\n  \u003cli\u003eMaintain gentle bend radius to prevent conductor or dielectric damage\u003c\/li\u003e\n  \u003cli\u003eSecure cable with UV-rated clips or conduit for long outdoor runs\u003c\/li\u003e\n  \u003cli\u003eConsider splitters and amplifiers rated for RG11 runs to preserve performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this cable is for: installers, hobbyists, and homeowners who need a robust 50-foot coax for long-distance TV, satellite, or antenna hookups. Choose MOOKEERF RG11 50ft when you require lower attenuation than RG6, solid shielding against interference, and weather-ready construction for outdoor feeds.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this RG11 cable better than RG6 for rooftop satellite runs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. RG11’s thicker 14AWG conductor and higher shielding reduce attenuation on long rooftop runs compared with RG6.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors pre-installed and weatherproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. MOOKEERF ships with factory-mounted F-type connectors and a UV-resistant PVC jacket for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48444251144349,"sku":"B0BYJ7G6PQ","price":49.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-rg11-50ft-front-packing.jpg?v=1781542119","url":"https:\/\/nexoltic.com\/products\/mookeerf-rg11-50ft-low-loss-coax-cable-14awg","provider":"Nexoltic","version":"1.0","type":"link"}