{"product_id":"mookeerf-bnc-male-to-male-40ft-rg58-coax-cable","title":"MOOKEERF BNC Male-to-Male 40ft RG58 Coax Cable","description":"\u003cp\u003e\u003cstrong\u003eThe MOOKEERF 40ft BNC male-to-male RG58 coax cable is a 50-ohm, low-loss cable built for reliable RF and video signal transmission with durable BNC connectors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 40-foot black coaxial cable combines a solid-copper center conductor, bonded aluminum foil, and a tinned-copper braid to protect signals over longer runs. Designed for radio and video applications, it offers low reflected power and high shielding to minimize interference. The reinforced heat-shrink on each connector reduces the chance of pull-out and helps keep the connection stable during repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable preserve signal quality over long runs?\u003c\/h3\u003e\n\u003cp\u003eThe MOOKEERF RG58 cable uses a solid copper core and a dense tinned-copper braid with bonded aluminum foil to reduce loss and external noise. Its construction lowers insertion loss and keeps signal integrity for both RF and baseband video across the 40-foot span.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50-ohm impedance matched for typical RF systems and antennas\u003c\/li\u003e\n  \u003cli\u003eLow VSWR — 1.15 measured at 450 MHz, reducing reflected energy\u003c\/li\u003e\n  \u003cli\u003eHighly tinned braid and aluminum foil for strong EMI\/RFI protection\u003c\/li\u003e\n  \u003cli\u003ePure\/solid copper conductor for lower resistance and better conductivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the connectors durable and resistant to accidental pull-out?\u003c\/h3\u003e\n\u003cp\u003eYes — each BNC connector is finished with an extended heat-shrink sleeve that includes inner adhesive to lock the cable to the connector body. That reinforced termination helps prevent mechanical strain from loosening or separating the connector during installation or movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.2-inch heat-shrink sleeve with inner adhesive for secure bond\u003c\/li\u003e\n  \u003cli\u003eRobust BNC male-to-male ends designed for repeated mating cycles\u003c\/li\u003e\n  \u003cli\u003eConstruction reduces risk of connector separation under tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and use-cases is this cable suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe cable is intended for RF and video signal transfer where a 50-ohm line is appropriate. Common uses include two-way radios, ham and amateur radio setups, scanners, antenna extensions, and BNC-equipped receivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way and ham radios (HF\/VHF\/UHF applications where RG58 is acceptable)\u003c\/li\u003e\n  \u003cli\u003eBNC antenna extensions and receiver connections\u003c\/li\u003e\n  \u003cli\u003eRadio scanners, monitoring stations, and some CCTV systems using BNC\u003c\/li\u003e\n  \u003cli\u003eHome or portable radio installations needing a 40-foot run\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this cable handle interference and standing waves?\u003c\/h3\u003e\n\u003cp\u003eMOOKEERF’s layered shield design (foil + braid) provides strong attenuation against electromagnetic and radio-frequency interference. The low VSWR figure indicates fewer reflected waves, translating into more efficient power transfer and cleaner reception for many radio and video setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFoil plus tinned-copper braid for multi-layer shielding\u003c\/li\u003e\n  \u003cli\u003eLow VSWR (1.15 at 450 MHz) for reduced signal reflections\u003c\/li\u003e\n  \u003cli\u003eMinimized static or noise introduced when connecting devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need a dependable 40-foot BNC-to-BNC coax solution for ham radio, scanner setups, antenna extensions, or BNC-equipped receivers and video gear, this MOOKEERF RG58 cable balances flexibility, shielding, and connector security. It’s aimed at hobbyists, radio operators, and technicians who want a mid-length, 50-ohm cable that resists interference and connector failure while keeping losses low for everyday RF and video tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable compatible with ham radios and scanners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a 50-ohm RG58 BNC male-to-male cable suitable for many ham radios, scanners, and antenna connections where BNC is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does VSWR 1.15 at 450 MHz mean for performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A VSWR of 1.15 at 450 MHz indicates low signal reflection, improving power transfer and reducing interference for RF and video use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48412818309277,"sku":"B0CS3295F5","price":45.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-bnc-front-view.jpg?v=1781250334","url":"https:\/\/nexoltic.com\/products\/mookeerf-bnc-male-to-male-40ft-rg58-coax-cable","provider":"Nexoltic","version":"1.0","type":"link"}