{"product_id":"mookeerf-bnc-cable-35ft-rg58-50ω-male-to-male","title":"MOOKEERF BNC Cable 35FT RG58 50Ω Male-to-Male","description":"\u003cp\u003e\u003cstrong\u003eMOOKEERF 35FT RG58 BNC cable is a 50-ohm, low-loss male-to-male coaxial lead built to preserve RF and video signals across long runs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis rugged 35-foot BNC extension uses an RG58 core with a solid copper conductor, tinned-copper braid and bonded foil shielding to minimize signal degradation and interference. It combines a low VSWR profile with reinforced heat-shrinked BNC connectors secured by an inner adhesive sleeve so the cable resists connector pull-out and corrosion during routine use. The cable is intended for applications from amateur radio and scanners to oscilloscopes and antenna extensions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable reduce signal loss over a long 35-foot run?\u003c\/h3\u003e\n\n\u003cp\u003eThe cable’s RG58 construction and high-quality shielding maintain signal integrity by limiting leakage and external noise pickup. A low VSWR (measured around 1.15 at 450 MHz) indicates minimal reflection, which helps more signal reach the device at the far end.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid copper center conductor for consistent conductivity.\u003c\/li\u003e\n  \u003cli\u003eBonded aluminum foil plus tinned-copper braid for multi-layer shielding.\u003c\/li\u003e\n  \u003cli\u003eLow VSWR specification for cleaner RF transmission.\u003c\/li\u003e\n  \u003cli\u003e35ft length balances reach with acceptable attenuation for many radio and video uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the connectors stay secure and resist corrosion?\u003c\/h3\u003e\n\n\u003cp\u003eMOOKEERF fits each BNC coupling with an extended heat-shrink sleeve that includes an inner adhesive layer to lock the connector to the jacket. The sleeve length and internal adhesive lower the risk of the connector separating under strain and help block moisture ingress.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2.2-inch heat-shrink sleeve with bonded adhesive for strain relief.\u003c\/li\u003e\n  \u003cli\u003eTinned braid and corrosion-resistant materials on the outer layer.\u003c\/li\u003e\n  \u003cli\u003eDurable outer jacket to protect against abrasion and flexing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat devices and setups work well with this BNC-to-BNC cable?\u003c\/h3\u003e\n\n\u003cp\u003eThe cable supports both RF and composite video transfers, making it a flexible choice for radio systems, lab equipment and antenna extensions. It suits two-way radios, ham\/ham shack setups, spectrum analyzers, oscilloscope inputs, and BNC-equipped receivers or scanners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo-way and amateur radio antenna extensions and couplings.\u003c\/li\u003e\n  \u003cli\u003eOscilloscopes, spectrum analyzers and other test equipment with BNC inputs.\u003c\/li\u003e\n  \u003cli\u003eRadio scanners and BNC-equipped receivers requiring 50-ohm connections.\u003c\/li\u003e\n  \u003cli\u003eVideo or RF patching where a 50-ohm RG58 cable is appropriate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose this cable over other BNC options?\u003c\/h3\u003e\n\n\u003cp\u003ePick this MOOKEERF RG58 lead if you need a durable 35-foot, 50-ohm connection with improved shielding and a reinforced connector termination. It’s a practical middle ground between short patch cords and heavier, low-loss coax types used for very long runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBest when 35ft reach is required without upgrading to bulkier coax types.\u003c\/li\u003e\n  \u003cli\u003eGood for hobbyists, field operators and bench engineers who want reliable terminations.\u003c\/li\u003e\n  \u003cli\u003eCost-effective for antenna extensions, test rigs, and RF patching tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This MOOKEERF 35FT RG58 BNC cable is designed for hobby radio operators, field technicians, bench-test engineers and anyone needing a dependable 50-ohm male-to-male coax run of around 35 feet. If you prioritize solid shielding, low VSWR performance and a reinforced connector to reduce pull-out risk, this cable is a suitable, practical choice for RF, antenna and test-equipment connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable suitable for ham radio antennas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 50-ohm RG58 construction and low VSWR make it suitable for many ham antenna extensions and radio connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the connectors resist pull-out and moisture?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The extended heat-shrink sleeve with inner adhesive adds strain relief and helps seal the connector against moisture.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48412781183133,"sku":"B09GF8HKV9","price":42.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-bnc-cable-front-view.jpg?v=1781248497","url":"https:\/\/nexoltic.com\/products\/mookeerf-bnc-cable-35ft-rg58-50%cf%89-male-to-male","provider":"Nexoltic","version":"1.0","type":"link"}