{"product_id":"mookeerf-antenna-pole-mount-bracket-kit-30-50-mm","title":"MOOKEERF Antenna Pole Mount Bracket Kit 30–50 mm","description":"\u003cp\u003e\u003cstrong\u003eMOOKEERF Antenna Pole Mount Bracket Kit is a weatherproof, heavy‑duty mast mounting set that secures outdoor antenna poles 30–50 mm in diameter with a V‑jaw clamp and included U‑bolts and fasteners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for rooftop and exterior wall installations, this MOOKEERF pole mount bundle supplies the metal bracket, V‑jaw clamps, U‑bolts, nuts and washers needed to fasten an antenna mast quickly and reliably. Constructed from 2.5 mm galvanized, zinc‑plated iron with an anti‑rust finish, the kit resists corrosion and holds up under wind and rain. The components fit poles from about 1.1 to 1.97 inches (30–50 mm) and are intended for common residential and light commercial antenna setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bracket keep an antenna mast stable in strong wind?\u003c\/h3\u003e\n\n\u003cp\u003eThe MOOKEERF kit uses a V‑jaw clamp design combined with U‑bolts to increase clamping surface and prevent slippage along the mast. The thicker 2.5 mm metal plate and reinforced fastening points help reduce flex at the connection, keeping the pole aligned under stress.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eV‑jaw brackets secure more surface area of the pole for better grip\u003c\/li\u003e\n  \u003cli\u003eGalvanized, zinc‑plated iron resists bending and corrosion\u003c\/li\u003e\n  \u003cli\u003eSpring and plain washers help maintain tension through temperature cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pole sizes and mounting locations does the kit support?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly is built for poles with diameters between 30 mm and 50 mm (1.1–1.97 in). It can be mounted on exterior walls, fascia, or vertical surfaces where a U‑bolt and bracket can be fastened, making it useful for attic eaves, chimney supports, and backyard mounts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with poles 30–50 mm diameter\u003c\/li\u003e\n  \u003cli\u003eSuitable for exterior walls, eaves, and sturdy vertical surfaces\u003c\/li\u003e\n  \u003cli\u003eIncludes hardware to attach the bracket to a variety of common surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and how simple is the installation process?\u003c\/h3\u003e\n\n\u003cp\u003eThe MOOKEERF set arrives with everything needed to mount a single antenna pole: main mounting bracket, two V‑jaw clamp pieces, two U‑bolts, four nuts, four spring washers, four plain washers and four screws. Most users can install the kit with basic hand tools in one session, following standard safety practices for working at height.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete hardware kit for one mast mount—no extra parts required\u003c\/li\u003e\n  \u003cli\u003eQuick assembly using common wrenches and a drill for pilot holes\u003c\/li\u003e\n  \u003cli\u003ePre‑finished parts reduce prep time and protect against weathering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the construction and what maintenance is needed?\u003c\/h3\u003e\n\n\u003cp\u003eBuilt from 2.5 mm galvanized zinc‑plated iron with an anti‑rust coating, the bracket is engineered for long outdoor service. Occasional visual inspections and tightening of nuts after severe weather will extend service life; replacement of corroded components is straightforward when needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThick metal plate and plated finish for long outdoor life\u003c\/li\u003e\n  \u003cli\u003eRegular visual checks and re‑tightening advised after storms\u003c\/li\u003e\n  \u003cli\u003eIndividual fasteners available for replacement if required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MOOKEERF antenna pole mount bracket kit is ideal for homeowners, DIY installers, and small‑scale contractors mounting TV, FM, or low‑profile communications antennas on exterior walls or roof eaves. Choose this set when you need a compact, corrosion‑resistant mounting solution that fits 30–50 mm poles and includes all the fasteners required for a tidy, secure installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bracket fit my 40 mm antenna pole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit supports poles from 30 mm to 50 mm diameter, so a 40 mm pole fits securely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the mount myself on an exterior wall?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes all hardware; basic tools and safe access are required for DIY installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48455081525405,"sku":"B0F83ZW1YS","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-front-view-mounted-bracket.jpg?v=1781717961","url":"https:\/\/nexoltic.com\/products\/mookeerf-antenna-pole-mount-bracket-kit-30-50-mm","provider":"Nexoltic","version":"1.0","type":"link"}