{"product_id":"mookeerf-25ft-rg58-bnc-cable-50ω-male-to-male-coax","title":"MOOKEERF 25FT RG58 BNC Cable 50Ω Male-to-Male Coax","description":"\u003cp\u003e\u003cstrong\u003eThe MOOKEERF 25FT RG58 BNC Cable is a 50-ohm, low-loss male-to-male coaxial lead designed to reliably carry RF and video signals between antennas, radios, test gear and scanners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 25-foot BNC cable pairs a solid-copper center conductor with a tinned-copper braid and bonded aluminum foil shield to reduce signal attenuation and resist corrosion over time. Built for hobbyist and professional use, the cable balances flexibility and shielding so it performs well for radio links, antenna extensions, spectrum analyzers, and lab instruments without introducing extra noise.\u003c\/p\u003e\n\n\u003ch3\u003eHow well will this cable preserve signal quality over 25 feet?\u003c\/h3\u003e\n\u003cp\u003eThe cable uses an RG58 construction with a pure solid copper center and multiple shielding layers to limit loss across common RF bands. Measured VSWR is very low at typical frequencies, which means less reflected energy and cleaner transmission.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid copper inner conductor for minimal resistive loss.\u003c\/li\u003e\n  \u003cli\u003eBonded aluminum foil plus tinned-copper braid for high shielding effectiveness.\u003c\/li\u003e\n  \u003cli\u003eLow VSWR performance (~1.15 at 450 MHz) to reduce standing waves.\u003c\/li\u003e\n  \u003cli\u003eLength optimized at 25 ft for many antenna and test setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the connectors stay secure during frequent use?\u003c\/h3\u003e\n\u003cp\u003eThe MOOKEERF cable uses extended heat-shrink and internal adhesive at the BNC crimp to strengthen the junction between cable and connector. This construction helps prevent the connector from loosening or pulling off during repeated connections and movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended heat-shrink tubing covers the connector base for strain relief.\u003c\/li\u003e\n  \u003cli\u003eInner adhesive reinforces the cable-to-connector bond.\u003c\/li\u003e\n  \u003cli\u003eDurable BNC male ends compatible with standard bayonet sockets.\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce connector pull-out under tension or flexing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat devices and signals is this cable suitable for?\u003c\/h3\u003e\n\u003cp\u003eThis BNC-to-BNC cable supports both RF and composite video signals and is commonly used with two-way radios, ham rigs, scanners, oscilloscopes and certain modems. It’s suitable wherever a 50-ohm coax link with BNC terminations is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way radio and ham radio antenna extensions.\u003c\/li\u003e\n  \u003cli\u003eRadio scanners, receivers and spectrum analyzers.\u003c\/li\u003e\n  \u003cli\u003eOscilloscopes and lab test equipment with BNC inputs.\u003c\/li\u003e\n  \u003cli\u003eVideo and RF applications that require 50 Ω impedance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the cable in different environments?\u003c\/h3\u003e\n\u003cp\u003eThe combination of tinned braid and bonded foil adds corrosion resistance and maintains shielding in variable conditions, while the outer jacket protects the core from wear. It’s intended for indoor and sheltered outdoor use where flex and abrasion may occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTinned-copper braid resists oxidation for longer life.\u003c\/li\u003e\n  \u003cli\u003eOuter jacket offers abrasion and flex protection.\u003c\/li\u003e\n  \u003cli\u003eConnector reinforcement helps against mechanical stress.\u003c\/li\u003e\n  \u003cli\u003eNot intended for permanent direct burial or extreme weather exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, radio amateurs, electronics technicians and hobbyists who need a mid-length, reliable 50-ohm coax lead will find MOOKEERF’s 25FT RG58 BNC cable a practical choice. It fits shack-to-antenna extensions, links between test instruments, and general RF or composite video connections where consistent shielding and connector durability matter. If you require a longer run, different impedance, or weatherproofed burial cable, consider alternatives designed specifically for those conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable compatible with my ham radio antenna?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a standard 50-ohm BNC male-to-male RG58 cable, compatible with rigs and antennas that accept BNC 50Ω connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this cable outdoors permanently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s suitable for sheltered outdoor use, but not recommended for permanent direct burial or exposure to extreme weather without additional protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOKEERF","offers":[{"title":"Default Title","offer_id":48412810412189,"sku":"B0923JKDKR","price":35.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/mookeerf-bnc-cable-full-length-front.jpg?v=1781249830","url":"https:\/\/nexoltic.com\/products\/mookeerf-25ft-rg58-bnc-cable-50%cf%89-male-to-male-coax","provider":"Nexoltic","version":"1.0","type":"link"}