{"product_id":"meccanixity-heat-shrink-braided-cable-sleeve-1-3-8-60ft","title":"MECCANIXITY Heat-Shrink Braided Cable Sleeve 1 3\/8\" 60ft","description":"\u003cp\u003e\u003cstrong\u003eMECCANIXITY braided heat-shrink cable sleeve is a 35mm x 18m (1 3\/8\" x 60ft) PET sleeve that shrinks 2:1 to bind and protect bundled cables from abrasion, noise, and heat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep wiring neat, durable, and safer with a flexible braided sleeve engineered from PET. This 60-foot spool in black resists wear and reduces noise while offering thermal tolerance from 50–150°C (122–305°F) and a rated voltage resistance of 600V. Because it shrinks to half its original diameter when heated, the sleeve conforms snugly to harnesses, cable bundles, and awkward bends without adding stiffness.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sleeve protect my cables during daily use?\u003c\/h3\u003e\n\u003cp\u003eThe braided PET weave creates a protective layer that resists abrasion, oils, and minor impacts while damping vibration and noise. After heat is applied the sleeve tightens around the bundle, limiting movement between individual wires and preventing chafing at pass-throughs or mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: PET braid for wear and noise reduction\u003c\/li\u003e\n  \u003cli\u003eShrink ratio: 2:1 for a secure, custom fit\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: 50–150°C for most vehicular and industrial uses\u003c\/li\u003e\n  \u003cli\u003eVoltage rating: 600V suitable for common harness applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit multiple cables and odd-shaped harnesses?\u003c\/h3\u003e\n\u003cp\u003eYes — the sleeve is intentionally oversized before heat so it can accommodate several wires, adapters, or connectors. Once heated, the 2:1 shrink ratio compresses the braid to match irregular profiles and tight radii while remaining flexible enough to bend without breaking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial diameter: 35mm (1 3\/8\") expands over bundles\u003c\/li\u003e\n  \u003cli\u003ePost-shrink diameter: roughly half for snugness\u003c\/li\u003e\n  \u003cli\u003eFlexible braid adapts to bends and corners\u003c\/li\u003e\n  \u003cli\u003eSoft texture avoids damaging insulation during routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I cut, install, and heat this sleeve safely?\u003c\/h3\u003e\n\u003cp\u003eMeasure your run, cut the sleeve slightly longer than needed, and singe the cut ends with a heated blade or lighter to prevent fraying. Slide the sleeve over the cables first, then apply heat evenly (heat gun recommended) until the braid contracts uniformly; avoid exceeding the stated temperature range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Measure cable length and add slack for access\u003c\/li\u003e\n  \u003cli\u003eStep 2: Cut and seal ends with a warm blade to stop fray\u003c\/li\u003e\n  \u003cli\u003eStep 3: Thread cables, then heat with a gun for even shrink\u003c\/li\u003e\n  \u003cli\u003eTip: Maintain temperatures within 50–150°C for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this sleeve most commonly used and why?\u003c\/h3\u003e\n\u003cp\u003eIts combination of flexibility, thermal shrink behavior, and electrical rating makes it suitable for automotive harnesses, marine and railway installations, and complex electronics enclosures. Professionals choose braided, heat-shrinkable PET sleeves where bundled wires must be organized, protected from abrasion, and constrained without bulk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive wiring looms and aftermarket installs\u003c\/li\u003e\n  \u003cli\u003eShip and rail cable protection in confined channels\u003c\/li\u003e\n  \u003cli\u003eHome theater, networking, and workshop cable management\u003c\/li\u003e\n  \u003cli\u003eIndustrial harnessing and control panel runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need a long, robust sleeve to bundle multiple wires, reduce noise, and protect harnesses in vehicles, boats, or equipment, MECCANIXITY’s 1 3\/8\" braided heat-shrink sleeve is designed for installers, mechanics, electricians, and DIY enthusiasts. Its 60ft length suits large projects or repeated small tasks, while PET construction balances toughness with pliability for clean, professional routing and long-term durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the shrink ratio and final diameter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This sleeve shrinks at a 2:1 ratio; the original 35mm diameter reduces to about half after heating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a lighter to shrink the sleeve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A heat gun is best for even shrinking; a lighter can work for small areas but risks uneven shrink or damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MECCANIXITY","offers":[{"title":"Default Title","offer_id":48413577543837,"sku":"B0FHPLWNJ2","price":59.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/meccanixity-front-packaging-braided-sleeve_5092b1d2-20a7-4406-8b47-0003d43ed6e7.jpg?v=1781272329","url":"https:\/\/nexoltic.com\/products\/meccanixity-heat-shrink-braided-cable-sleeve-1-3-8-60ft","provider":"Nexoltic","version":"1.0","type":"link"}