{"product_id":"linovision-poe-over-coax-eoc-converter-3000ft","title":"LINOVISION PoE Over Coax EoC Converter 3000ft","description":"\u003cp\u003e\u003cstrong\u003eLINOVISION PoE Over Coax EOC Converter lets you convert existing RG59\/RG6\/RG11 coaxial runs into PoE-enabled Ethernet links so IP cameras receive power and data without re-cabling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you have a working analog CCTV coax network and want to migrate to IP cameras without pulling new Cat5\/6 cable, this EoC (Ethernet over Coax) converter pair provides a simple plug-and-play bridge. It supports standard 802.3af and 802.3at PoE and works with common coax types, offering long-reach transmission for remote or hard-to-access camera locations. The units are compact, industrially cooled, and designed for point-to-point links between a transmitter at the camera end and a receiver at the switch end.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this converter let me keep my existing coaxial cables?\u003c\/h3\u003e\n\n\u003cp\u003eThe LINOVISION EoC pair modulates Ethernet and PoE signals over standard coax so you can reuse RG59, RG6, or RG11 runs. One unit connects to the IP camera (transmitter) and the other to your PoE switch or injector (receiver) at the head end. This removes the need for tearing out walls or running new copper in many retrofit projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with RG59, RG6, RG11 coaxial cable types.\u003c\/li\u003e\n  \u003cli\u003ePoint-to-point MoCA-style link: one transmitter + one receiver per run.\u003c\/li\u003e\n  \u003cli\u003eSupports 802.3af (PoE) and 802.3at (PoE+) power standards.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play — no configuration required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat distances and bandwidths can I expect for PoE and Ethernet over coax or twisted pair?\u003c\/h3\u003e\n\n\u003cp\u003ePerformance depends on cable type and whether you use coax or the built-in twist-pair outputs. Over coax, the product supports very long reaches (up to approximately 3000 ft \/ 914 m under optimal conditions). Using the included BNC-to-twist-pair connectors yields about 100 Mbps up to 330 ft and 10 Mbps up to 1485 ft for both PoE and non-PoE devices.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCoax reach: up to roughly 3000 ft (approximate, install conditions vary).\u003c\/li\u003e\n  \u003cli\u003eTwist-pair mode: 100 Mbps up to 330 ft; 10 Mbps up to 1485 ft.\u003c\/li\u003e\n  \u003cli\u003eMaintains PoE\/PoE+ delivery when receiver is powered by PoE switch\/injector.\u003c\/li\u003e\n  \u003cli\u003eIdeal for long-run cameras, elevators, or legacy installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what equipment do I need at each end?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intentionally straightforward: this is a plug-and-play device designed for installers and integrators who want minimal setup. Connect the EoC transmitter to the camera (or PoE device) and the EoC receiver to a PoE switch or PoE injector; then join them with your coaxial cable or twist pair. No software, IP mapping, or extra configuration is required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTransmitter attaches to the camera end (PoE or non-PoE camera supported).\u003c\/li\u003e\n  \u003cli\u003eReceiver must be powered by a PoE switch or injector to deliver PoE to the camera.\u003c\/li\u003e\n  \u003cli\u003eNo configuration — just BNC\/coax or BNC-to-twist-pair connections and power.\u003c\/li\u003e\n  \u003cli\u003eIndoor use only; industrial heatsink improves reliability in crowded racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any system limits or things to watch for when using multiple lines?\u003c\/h3\u003e\n\n\u003cp\u003eThese converters are intended for point-to-point links—one transmitter matched with one receiver per coax run. When deploying multiple PoE-over-coax channels in the same system, cross-talk or interference can occur, so LINOVISION recommends using their EOC-Switch KIT for multi-line installations. Also note the receiver must be powered by a PoE source to feed remote PoE devices.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePoint-to-point only; not a multi-drop network device.\u003c\/li\u003e\n  \u003cli\u003eUse EOC-Switch KIT for multiple parallel PoE-over-coax links to reduce interference.\u003c\/li\u003e\n  \u003cli\u003eIndoor use only; ensure adequate ventilation for the built-in heatsink.\u003c\/li\u003e\n  \u003cli\u003eKeep transmitter\/receiver pairing consistent for each camera run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: installers, property managers, and system integrators who need a cost-effective way to migrate analog CCTV infrastructure to IP-based cameras without extensive re-cabling. It suits sites with long cable runs (parking lots, elevator shafts, warehouses), retrofit projects where wall access is limited, and anyone wanting PoE delivery over legacy coax while preserving bandwidth and camera power requirements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these converters with any RG59 coax cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They support RG59, RG6, and RG11; performance varies by cable quality and run length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a PoE switch at the receiver end?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The receiver must be powered by a PoE switch or injector to provide PoE to the camera.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LINOVISION","offers":[{"title":"Default Title","offer_id":48449164476573,"sku":"B07G194BQD","price":118.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/linovision-front-view-eoc-transceiver.jpg?v=1781628556","url":"https:\/\/nexoltic.com\/products\/linovision-poe-over-coax-eoc-converter-3000ft","provider":"Nexoltic","version":"1.0","type":"link"}