{"product_id":"kymate-30a-6-pin-12awg-dc-power-cable-for-mobile-radios","title":"Kymate 30A 6‑Pin 12AWG DC Power Cable for Mobile Radios","description":"\u003cp\u003e\u003cstrong\u003eKymate's 30A 6-pin DC power cable delivers a safe, high-current connection for mobile and base transceivers from ICOM, Yaesu, Kenwood and Alinco.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty power cord is built with 12AWG conductors and high-temperature fluororesin (FEP) insulation to support continuous currents up to 30 amps while remaining flexible and flame-resistant. At about 100 cm long, the assembly includes an inline 30A fuse and a molded 6-pin radio plug designed to match a wide range of popular amateur and commercial transceivers. The cable balances low loss, mechanical durability and safety features so you can power radios confidently in mobile, field or station setups.\u003c\/p\u003e\n\n\u003ch3\u003eWhich radios are compatible with this Kymate 6-pin power cord?\u003c\/h3\u003e\n\u003cp\u003eThe cord fits many legacy and current radios from ICOM, Yaesu, Kenwood and Alinco that accept the 6-pin DC plug standard. Check your radio’s manual or the factory connector shape to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eICOM models: IC-706 series, IC-718, IC-725A, IC-730\/737\/738, IC-740\/745\/751, IC-746\/756 and similar OPC-025D compatible units.\u003c\/li\u003e\n  \u003cli\u003eYaesu: FT-710, FT-840, FT-847, FT-857D, FT-890, FT-891, FT-897D, FT-920 and some FT-series transceivers.\u003c\/li\u003e\n  \u003cli\u003eKENWOOD: TS-50s, TS-60s, TS-120\/130, TS-140s and many TS-series portables and base units (PG-2Z compatible).\u003c\/li\u003e\n  \u003cli\u003eAlinco: DX-70, DX-77 and comparable mobile transceivers accepting the same 6-pin interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cable protect equipment during faults or overloads?\u003c\/h3\u003e\n\u003cp\u003eThe in-line 30A fuse interrupts excessive currents that could otherwise damage your radio or wiring. The fuse sits inside a molded holder so replacement is straightforward without altering the main assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30A fuse interrupts overcurrent events to protect radio electronics and vehicle wiring.\u003c\/li\u003e\n  \u003cli\u003eMolded fuse holder for secure contact and easy fuse replacement.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature FEP insulation resists heat and reduces fire risk in fault conditions.\u003c\/li\u003e\n  \u003cli\u003eHeavy 12AWG copper conductors minimize voltage drop under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build materials and electrical specs I should know?\u003c\/h3\u003e\n\u003cp\u003eThe cable uses 12AWG stranded copper conductors with FEP (fluororesin) insulation that provides excellent heat and flame resistance. The overall length is approximately 100 cm, and the assembly is engineered to carry up to 30 amps continuously when paired with the supplied inline fuse.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConductor gauge: 12AWG stranded copper for low resistance and flexibility.\u003c\/li\u003e\n  \u003cli\u003eInsulation: FEP (fluororesin) for high temperature tolerance and flame resistance.\u003c\/li\u003e\n  \u003cli\u003eFuse rating: 30A inline fuse included; replaceable in molded holder.\u003c\/li\u003e\n  \u003cli\u003eLength: roughly 100 cm (one meter) for typical mobile and desktop placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cable be easy to install in a mobile or base setup?\u003c\/h3\u003e\n\u003cp\u003eYes — the molded 6-pin plug is designed for direct connection to compatible radio DC ports, and the cable’s flexibility makes routing around dashboards or racks straightforward. The included fuse simplifies integration with vehicle power or bench power supplies by providing immediate protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded connector reduces accidental disconnects and ensures correct pin alignment.\u003c\/li\u003e\n  \u003cli\u003eSoft silicone-like FEP jacket eases bends and routing in tight spaces.\u003c\/li\u003e\n  \u003cli\u003eStandard pinout matches many factory radio power sockets for plug-and-play use.\u003c\/li\u003e\n  \u003cli\u003eOne-piece cable reduces the number of separate crimps and failure points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Operators who need a reliable, high-current power lead for mobile or base transceivers — especially hams, club stations or installers using ICOM, Yaesu, Kenwood or Alinco radios — will appreciate the robust 12AWG conductors, thermal-resistant insulation and a replaceable 30A fuse. If you require a meter-long, plug-ready power cord that minimizes voltage drop and adds overcurrent protection, this Kymate cable is a practical, cost-effective choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cable include a fuse and what rating is it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes a replaceable inline 30A fuse to protect the radio and wiring from overcurrent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What length and conductor size does this power cord use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cord is about 100 cm long and uses 12AWG stranded copper conductors for low voltage drop.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Kymate","offers":[{"title":"Default Title","offer_id":48412946825373,"sku":"B08112HW2R","price":21.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/kymate-front-molded-6pin-connector.jpg?v=1781253352","url":"https:\/\/nexoltic.com\/products\/kymate-30a-6-pin-12awg-dc-power-cable-for-mobile-radios","provider":"Nexoltic","version":"1.0","type":"link"}