{"product_id":"junnuj-20a-heavy-duty-power-strip-6-outlet-metal-3000j","title":"JUNNUJ 20A Heavy-Duty Power Strip 6-Outlet Metal 3000J","description":"\u003cp\u003e\u003cstrong\u003eJUNNUJ Heavy Duty 20 Amp Power Strip is a metal-bodied, 6-outlet, 12AWG surge-protected power bar built for garages, workshops, and industrial workbenches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to handle higher current demands and larger plugs, this 4-foot power strip combines a reinforced metal shell, a 12-gauge power cord, and a built-in 20A circuit breaker with 3000J surge capacity. It spaces outlets to fit bulky adapters, accepts a high-amp 5-15P input, and includes a 6-20R T-slot arrangement for flexible device connections. The result is a rugged, serviceable power solution intended for heavy tools, shop electronics, and demanding home setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this power strip handle heavy loads and big plugs?\u003c\/h3\u003e\n\u003cp\u003eThe JUNNUJ unit uses a 12AWG (12-gauge) cord and a metal chassis to tolerate higher current and rough use. Outlets are spaced 1.57 inches apart so oversized plugs and adapters can sit without crowding. Built-in high-current contacts and the 20A rating reduce heat buildup under sustained loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12AWG cord rated for 125V\/20A\/2500W continuous use\u003c\/li\u003e\n  \u003cli\u003e1.57\" center spacing between AC receptacles to fit wide plugs\u003c\/li\u003e\n  \u003cli\u003eDurable metal housing resists dents, impacts, and wear\u003c\/li\u003e\n  \u003cli\u003e4-foot cord for convenient reach in workshops and garages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surge and circuit protection does it provide?\u003c\/h3\u003e\n\u003cp\u003eProtection combines a 3000-joule surge suppression rating with an integrated 20A circuit breaker. The surge element helps absorb transient voltage spikes, while the breaker trips on overloads or short circuits to protect connected equipment. This setup is tuned for power tools, bench electronics, and devices that need stronger safeguarding than consumer strips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3000J surge absorption to reduce damage from spikes\u003c\/li\u003e\n  \u003cli\u003eIntegrated resettable 20A circuit breaker for overload safety\u003c\/li\u003e\n  \u003cli\u003eNoise and fluctuation reduction for sensitive peripherals\u003c\/li\u003e\n  \u003cli\u003eHardwired internal connections for stable high-current flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere and how can I mount or use this power bar?\u003c\/h3\u003e\n\u003cp\u003eThe metal casing and mounting-ready design make it suitable for industrial and residential work areas alike. It can be fastened to workbenches, walls, or tool cabinets and withstands harsher conditions than plastic strips. Use it for bench tools, compressors (within rating), chargers, test equipment, and multi-outlet setups where durability matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting holes and sturdy shell for bench or wall installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for garages, workshops, shops, and light industrial spaces\u003c\/li\u003e\n  \u003cli\u003e4-foot length offers flexible positioning near workstations\u003c\/li\u003e\n  \u003cli\u003eMetal build resists shop impacts and occasional moisture exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this power strip fit my tools and electronics safely?\u003c\/h3\u003e\n\u003cp\u003eYes, provided your combined device draw does not exceed 20 amps at 125 volts. The strip accommodates large plugs and T-slot 6-20R connections commonly used with higher-draw equipment. For continuous loads near the maximum rating, verify tool specifications and avoid daisy-chaining multiple high-current devices on the same strip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated 125V\/20A\/2500W maximum — check device amperage before use\u003c\/li\u003e\n  \u003cli\u003eAccepts high-amp 5-15P input and offers 6-20R T-slot compatibility\u003c\/li\u003e\n  \u003cli\u003eSpacing and metal contacts reduce heat at loaded outlets\u003c\/li\u003e\n  \u003cli\u003eAvoid paralleling multiple high-draw tools on a single bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? JUNNUJ's Heavy Duty 20 Amp Power Strip suits hobbyists, mechanics, and small-shop owners who need a robust, well-spaced, and surge-protected power distribution bar. It's aimed at users who prioritize durable construction, higher current capability, and practical mounting options over lightweight consumer strips. If you run bench tools, diagnostic equipment, or multiple bulky adapters and want a reliable metal-bodied solution, this power strip is designed for that environment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this power strip safe for power tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s rated for 125V\/20A with a 12AWG cord and 20A breaker, suitable for many shop tools if combined draw stays under 20A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mount the JUNNUJ power strip on a wall?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the metal housing supports secure mounting to workbenches, walls, or tool cabinets for workshop use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JUNNUJ","offers":[{"title":"Default Title","offer_id":48413388963997,"sku":"B0F3D6MZS5","price":38.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/junnuj-front-metal-power-strip_7f0c5efc-b217-4a2d-87ca-2df23a483f66.jpg?v=1781262775","url":"https:\/\/nexoltic.com\/products\/junnuj-20a-heavy-duty-power-strip-6-outlet-metal-3000j","provider":"Nexoltic","version":"1.0","type":"link"}