{"product_id":"jaremite-vga-extender-over-cat5e-cat6-328-ft-100-m","title":"Jaremite VGA Extender over Cat5e\/Cat6 — 328 ft (100 m)","description":"\u003cp\u003e\u003cstrong\u003eThe Jaremite VGA Over Ethernet kit extends VGA video and audio up to 328 ft (100 m) using a sender and receiver linked by Cat5e\/Cat6 cabling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact sender+receiver pair converts a standard VGA source into a signal that travels over economical Ethernet cable, preserving resolutions up to 1920 x 1440 @60Hz. Designed for plug-and-play operation with two included 5V power adapters, the set is built for installations where the display is far from the computer, DVR, or projector — for classrooms, meeting rooms, retail displays, and multimedia installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I set the Jaremite VGA extender up?\u003c\/h3\u003e\n\u003cp\u003eSetup requires only a few cables and takes minutes: connect the sender to your VGA source and the receiver to the display, then join the two units with a Cat5e\/6 cable and power both units. No drivers or software are needed — the system works across common OS platforms.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse a VGA (HDB15) male-to-male cable from source to Sender, and from Receiver to display.\u003c\/li\u003e\n\u003cli\u003eRun a single Cat5e or Cat6 cable between Sender RJ45 and Receiver RJ45 for up to 100 m\/328 ft.\u003c\/li\u003e\n\u003cli\u003ePlug in the two supplied DC5V adapters to power Sender and Receiver before turning devices on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat video quality and formats are supported?\u003c\/h3\u003e\n\u003cp\u003eThe extender supports standard VGA family formats including VGA, SVGA, XGA and UXGA, and is rated to deliver up to 1920 x 1440 @60Hz when installed with quality cabling. Performance depends on cable quality, length, and local electromagnetic conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum supported resolution: 1920 x 1440 @60Hz for clear computer and DVR output.\u003c\/li\u003e\n\u003cli\u003eWorks with VGA-capable monitors, projectors and many TVs using VGA input.\u003c\/li\u003e\n\u003cli\u003eFor best results use shielded Cat6 and properly seated VGA connectors to avoid interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes it carry audio and what power or cables are needed?\u003c\/h3\u003e\n\u003cp\u003eThe kit passes analog audio via 3.5 mm audio jacks alongside VGA video when you connect the audio cables at both ends. Two DC5V power adapters are included; both sender and receiver require their own power for full-range operation over longer distances.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio: connect DC3.5 audio cables from source to Sender and from Receiver to speakers\/headphones.\u003c\/li\u003e\n\u003cli\u003ePower: two included 5V adapters — one for Sender, one for Receiver — are necessary for operation.\u003c\/li\u003e\n\u003cli\u003eCable advice: use shielded network cable and quality RJ45 terminations to reduce artifacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat troubleshooting steps fix common display issues?\u003c\/h3\u003e\n\u003cp\u003eMany image problems are due to loose connectors, poor cable quality, or electromagnetic interference. Simple checks usually restore normal operation without replacement parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf the screen flickers or colors shift, verify VGA connectors and RJ45 terminations are tight and fully seated.\u003c\/li\u003e\n\u003cli\u003eIf no image and no LEDs, confirm both power adapters are connected and indicator lights are on.\u003c\/li\u003e\n\u003cli\u003eFor diagonal lines or ghosting, remove nearby interference sources or switch to shielded Cat6 and better crimped plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, AV integrators, educators, and small-business owners who need to place displays far from the video source without rewiring for HDMI. The Jaremite VGA Extender is suited to legacy VGA equipment, DVR surveillance setups, conference-room displays, and stage or retail installations where a reliable, low-cost long-distance VGA link is required. Choose shielded Cat6 and carefully seated connections for the cleanest images and longest trouble-free runs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How far can this VGA extender transmit video?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It extends VGA and audio up to 100 m (328 ft) over Cat5e\/Cat6 cable under optimal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need drivers to use the Jaremite VGA extender?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit is plug-and-play and works with common operating systems without additional software.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jaremite","offers":[{"title":"Default Title","offer_id":48413436575901,"sku":"B07F3RW1C1","price":49.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/jaremite-front-view-sender-receiver.jpg?v=1781265819","url":"https:\/\/nexoltic.com\/products\/jaremite-vga-extender-over-cat5e-cat6-328-ft-100-m","provider":"Nexoltic","version":"1.0","type":"link"}