{"product_id":"gftvrce-sony-vesa-spacer-adapter-screws-for-x8000h-x90j","title":"GFTVRCE Sony VESA Spacer Adapter Screws for X8000H X90J","description":"\u003cp\u003e\u003cstrong\u003eThese GFTVRCE spacer screws adapt your Sony VESA mount by extending the TV stand screw length, enabling secure wall-mount or stand installation on select X8000H, X9000H, X9500H, X90J and related models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Sony television's rear mounting holes sit deeper than the supplied stand or mount screws reach, a spacer adapter pair solves the gap without replacing the TV or mount. These genuine-style, sealed-bag GFTVRCE spacers (front diameter 5 mm) slip over the factory screws to add length while preserving proper alignment and pressure distribution. They come as a set of four and are intended to be used together with your TV’s original stand or mounting screws.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Sony model and VESA pattern?\u003c\/h3\u003e\n\n\u003cp\u003eThey are designed for compatibility with many Sony models that require extended screw length, including X8000H, X9000H, X9500H, X90J\/91J series and several Z\/ A80\/85\/80K variants. Compatibility depends on the rear hole diameter and VESA screw thread; the spacer front diameter is 5 mm, so measure the TV’s hole before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible families: X8000H \/ X9000H \/ X9500H \/ X90J \/ Z9J \/ A80K series and similar models.\u003c\/li\u003e\n  \u003cli\u003eFront diameter: 5 mm — confirm matching rear hole size.\u003c\/li\u003e\n  \u003cli\u003eIncludes four spacer adapters for standard four-point TV mounts and stands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the spacer with my TV stand or wall mount?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: place each spacer onto the TV stand or mount screw so the spacer extends between the screw head and the TV’s rear surface. Tighten the screw carefully until the TV is held securely; do not overtighten. These spacers are intended to be used together with the TV’s original screws rather than as standalone fasteners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlide spacer over the screw before inserting into the TV rear hole.\u003c\/li\u003e\n  \u003cli\u003eTighten gradually and check alignment at each corner.\u003c\/li\u003e\n  \u003cli\u003eDo not overtighten — use even pressure to avoid stress on the TV chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and safety considerations should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThese GFTVRCE spacers are produced as replacement hardware for extending screw reach and are sold in a sealed retail bag. They are mechanical adapters only — they don’t change VESA ratings or bearing capacity. For heavy screens or nonstandard mounts, follow the mount manufacturer’s weight and spacing guidelines and consider professional installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSold as a 4-piece set in sealed packaging.\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with original TV stand\/mount screws, not as primary load-bearing anchors alone.\u003c\/li\u003e\n  \u003cli\u003eConfirm hole diameter (5 mm front) and thread fit before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan one spacer set replace missing or damaged original parts?\u003c\/h3\u003e\n\n\u003cp\u003eThe set can bridge short screw-length differences and help when original spacers are missing or too short. However, they are not a full replacement for damaged mount hardware; if screws, threads, or mounting points are compromised, replace the damaged components or consult support for safe alternatives.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUseful for restoring correct screw engagement when original spacers are absent.\u003c\/li\u003e\n  \u003cli\u003eNot recommended if mounting threads or screw heads are stripped or damaged.\u003c\/li\u003e\n  \u003cli\u003eCheck TV manual or manufacturer support for model-specific fastening requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This four-piece GFTVRCE spacer adapter pack suits DIYers, AV installers, and owners of compatible Sony TVs who need a reliable way to extend the length of existing stand or wall-mount screws. It’s ideal when factory screws are too short to reach the TV’s recessed mounting holes, when you want to preserve original hardware, or when you need small, serviceable adapters without replacing an entire mount system. Always verify the 5 mm front diameter and confirm thread fit with your TV model before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size hole does this spacer require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spacer front diameter is 5 mm; confirm your TV’s rear hole diameter before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these without the original TV screws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these spacers are intended to extend your original stand or mount screws, not replace them.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GFTVRCE","offers":[{"title":"Default Title","offer_id":48449247019165,"sku":"B0CPDYJ74K","price":21.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/gftvrce-front-packaging-vesa-spacer.jpg?v=1781630143","url":"https:\/\/nexoltic.com\/products\/gftvrce-sony-vesa-spacer-adapter-screws-for-x8000h-x90j","provider":"Nexoltic","version":"1.0","type":"link"}