{"product_id":"foboiu-os2-single-mode-sc-to-lc-5m-fiber-patch-cables","title":"Foboiu OS2 Single-Mode SC to LC 5m Fiber Patch Cables","description":"\u003cp\u003e\u003cstrong\u003eFoboiu 5m OS2 single-mode SC-to-LC fiber patch cables (5-pack) are pre-tested, LSZH-jacketed duplex jumpers engineered for low insertion loss and long-distance Ethernet and fiber-channel links.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Foboiu duplex patch cords pair SC and LC UPC connectors on 9\/125µm single-mode fiber, supplied in a bright yellow jacket for easy identification. Each 5-meter cord is individually tested to meet stringent optical performance criteria and built with an LSZH outer jacket for reduced smoke and halogen emissions. The 3.0mm OD cable and included plastic clip make routing and separation of duplex fibers straightforward for racks, patch panels, and wall outlets.\u003c\/p\u003e\n\n\u003ch3\u003eHow reliable is the optical performance for critical network runs?\u003c\/h3\u003e\n\u003cp\u003eEach cable in this five-pack is individually tested to ensure consistent performance, with insertion loss held to tight limits and strong return loss values. That testing verifies each jumper before shipping, reducing variability between cables in the same deployment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsertion loss ≤ 0.3 dB per connector for low signal attenuation\u003c\/li\u003e\n  \u003cli\u003eReturn loss ≥ 50 dB for minimal back reflections\u003c\/li\u003e\n  \u003cli\u003eUPC ferrules for repeatable, low-loss mating\u003c\/li\u003e\n  \u003cli\u003eComplies with TIA\/EIA-568-C.3 single-mode cable guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these OS2 cables handle long-distance links and high-speed traffic?\u003c\/h3\u003e\n\u003cp\u003eYes—OS2 single-mode fiber is optimized for long-reach transmission, suitable for runs from building-to-building up to many kilometers depending on equipment. The 9\/125µm core and UPC-polished connectors support 1G to 10G Ethernet and fiber-channel applications when paired with appropriate transceivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOS2 single-mode fiber for extended-distance links\u003c\/li\u003e\n  \u003cli\u003eCompatible with LAN, SAN, fast Ethernet, and fiber channel\u003c\/li\u003e\n  \u003cli\u003e5 meter length for short patching and consolidation panels\u003c\/li\u003e\n  \u003cli\u003eDuplex SC—LC configuration fits a variety of panel-transceiver setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and handling features does the cable offer?\u003c\/h3\u003e\n\u003cp\u003eThe outer jacket uses LSZH (low-smoke, zero-halogen) material to limit hazardous emissions during a fire, making these jumpers safer for enclosed spaces like data centers. The 3.0mm diameter balances flexibility with protection, while plastic clip connectors allow easy separation and tidy routing of duplex pairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLSZH jacket reduces smoke and halogen release in emergencies\u003c\/li\u003e\n  \u003cli\u003e3.0mm outer diameter for manageable bend radius and routing\u003c\/li\u003e\n  \u003cli\u003ePlastic clip connectors included for duplex management\u003c\/li\u003e\n  \u003cli\u003eDurable UPC ferrules for repeated matings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I integrate these SC-to-LC jumpers into my existing setup?\u003c\/h3\u003e\n\u003cp\u003eThe SC-to-LC duplex format makes these jumpers a practical choice for linking SC-based patch panels to LC transceivers or modules. Their standardized connector bodies and color-coded yellow jacket simplify identification and reduce installation errors during rack or wall-mount work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSC end for legacy patch panels, LC end for modern transceivers\u003c\/li\u003e\n  \u003cli\u003eYellow jacket for single-mode identification in mixed cabling arrays\u003c\/li\u003e\n  \u003cli\u003eFive identical 5m jumpers to support multiple adjacent connections\u003c\/li\u003e\n  \u003cli\u003eIndividually tested units minimize troubleshooting after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: IT teams, telecom installers, and data center operators who need dependable, pre-tested single-mode duplex jumpers for short-radius patching and longer backbone links will find this Foboiu 5-pack useful. It’s also suited for labs, staging environments, and service providers who want consistent optical performance and LSZH safety where low smoke and halogen-free materials are preferred.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these cables suitable for 10GbE?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The OS2 9\/125µm single-mode jumpers with UPC connectors support 10GbE when used with compatible transceivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the cables come individually tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each 5m cable is individually tested for insertion loss and return loss before shipping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Foboiu","offers":[{"title":"Default Title","offer_id":48413511516317,"sku":"B0D2N5JBF3","price":53.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/foboiu-front-packaging-sc-lc-5m.jpg?v=1781270112","url":"https:\/\/nexoltic.com\/products\/foboiu-os2-single-mode-sc-to-lc-5m-fiber-patch-cables","provider":"Nexoltic","version":"1.0","type":"link"}