{"product_id":"ds18-6-5-pro-x6mse-midrange-speaker-225w-rms-sealed-basket-red-steel-8ω-92db","title":"DS18 6.5\" PRO-X6MSE Midrange Speaker — 225W RMS, Sealed Basket, Red Steel 8Ω, 92dB","description":"\u003cp\u003e\u003cstrong\u003eThe DS18 PRO-X6MSE is a 6.5-inch sealed-back midrange loudspeaker engineered to deliver clear vocals and instruments with 225W RMS (450W peak) for car and truck stereo systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt to replace weak factory midranges, this DS18 speaker combines a non-pressed paper cone, cloth surround, and a rigid red steel basket to produce an articulate midband from 511 Hz to 13.5 kHz. The ferrite magnet and a 1.5\" high-temperature CCAW voice coil are designed to withstand demanding listening sessions while maintaining consistent performance. With an 8-ohm impedance and 92 dB sensitivity, the PRO-X6MSE is matched to a wide range of aftermarket amplifiers and factory head units that need a focused, musical midrange.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this midrange improve vocals and instruments in my car?\u003c\/h3\u003e\n\u003cp\u003eThe PRO-X6MSE focuses on the heart of the audible spectrum where vocals and many instruments sit. Its paper cone and tuned surround provide natural transient response so singers and acoustic instruments sound clearer and more lifelike without artificial brightness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFrequency response spanning 511 Hz–13.5 kHz for accurate midband detail\u003c\/li\u003e\n  \u003cli\u003eNon-pressed paper cone for natural tonal color\u003c\/li\u003e\n  \u003cli\u003e92 dB sensitivity for efficient output from modest amplifiers\u003c\/li\u003e\n  \u003cli\u003eCloth surround that preserves transient dynamics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power handling and thermal robustness should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis driver is rated at 225W RMS and 450W peak, giving a comfortable power ceiling for most car audio amplifiers. The 1.5\" two-layer CCAW voice coil provides improved heat dissipation and mechanical stability to avoid compression during extended high-volume playback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e225W continuous power handling for sustained performance\u003c\/li\u003e\n  \u003cli\u003e450W peak for headroom during dynamic passages\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature CCAW voice coil resists overheating\u003c\/li\u003e\n  \u003cli\u003eFerrite magnet sustains magnetic flux under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this speaker fit my vehicle and how do I mount it?\u003c\/h3\u003e\n\u003cp\u003eThe DS18 PRO-X6MSE uses common 6.5\" mounting dimensions but requires checking depth and cut-out clearance before installation. With a 3.6\" mounting depth and a 5.7\" (144 mm) cut-out diameter, it fits many standard door and dash openings where midrange replacement is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting depth: 3.6\" (67 mm) for typical door cavities\u003c\/li\u003e\n  \u003cli\u003eCut-out diameter: 5.7\" (144 mm) for accurate fitment\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance—compatible with many OEM and aftermarket amps\u003c\/li\u003e\n  \u003cli\u003eRed steel basket for rigid mounting and long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this speaker change my overall system tuning?\u003c\/h3\u003e\n\u003cp\u003eAdding a dedicated midrange like the PRO-X6MSE tightens the midband and reduces strain on woofers and tweeters by letting each driver cover a more specific range. This improves clarity, imaging, and vocal intelligibility without needing complex crossovers in many systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharper vocal intelligibility and instrument separation\u003c\/li\u003e\n  \u003cli\u003eLess distortion from woofers when crossing over lower midrange\u003c\/li\u003e\n  \u003cli\u003eCompatible with simple passive crossovers or active processing\u003c\/li\u003e\n  \u003cli\u003eEfficient 92 dB sensitivity helps preserve headroom\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DS18 PRO-X6MSE suits car and truck owners, audiophiles, and installers seeking a high-quality midrange upgrade to unlock better vocals and instrument detail. It’s ideal for those replacing worn factory speakers, building component sets, or anyone wanting a robust 6.5\" sealed-back midrange that pairs well with aftermarket amplifiers and multi-way systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the PRO-X6MSE compatible with factory amplifiers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — its 8-ohm impedance and 92 dB sensitivity work well with many factory amps, though an aftermarket amp improves headroom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cut-out and mounting depth are required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cut-out diameter is 5.7\" (144 mm) and mounting depth is 3.6\" (67 mm). Measure your door before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":48424235827357,"sku":"B01AJ2UP5I","price":67.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/ds18-pro-x6mse-front-view.jpg?v=1781366431","url":"https:\/\/nexoltic.com\/products\/ds18-6-5-pro-x6mse-midrange-speaker-225w-rms-sealed-basket-red-steel-8%cf%89-92db","provider":"Nexoltic","version":"1.0","type":"link"}