{"product_id":"cccei-3-outlet-20a-heavy-duty-surge-protector","title":"CCCEI 3-Outlet 20A Heavy-Duty Surge Protector","description":"\u003cp\u003e\u003cstrong\u003eCCCEI's 3-outlet heavy-duty surge protector is a 20A, 12-gauge power strip with individual switches, 10-foot cord, overload and grounding protection built for garages and workshops.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis robust power extender combines a long, thick 12-gauge cord with a grounded NEMA 5-15P plug, three widely spaced outlets and independent switches protected by a dedicated 20A circuit breaker. Designed for higher-draw tools and multiple devices, the unit adds durable, wall-mountable power where bench, garage or shop setups need reliable distribution and surge protection. The housing mixes thickened aluminum and ABS fire-resistant materials for a rugged finish and improved recyclability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this power strip protect my tools and electronics?\u003c\/h3\u003e\n\u003cp\u003eThe CCCEI strip includes surge suppression and grounding to reduce the impact of short voltage spikes, while a visible indicator shows surge protection status. Each outlet has its own switch and is backed by a 20A circuit breaker to isolate a fault without shutting down everything.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4800 joules of surge suppression for larger transient events\u003c\/li\u003e\n  \u003cli\u003eGrounding contact present on each outlet for safety\u003c\/li\u003e\n  \u003cli\u003eIndividual switches allow single-outlet control and circuit isolation\u003c\/li\u003e\n  \u003cli\u003eSurge indicator light to monitor protection status\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the cord and plug suitable for heavy-duty or workshop use?\u003c\/h3\u003e\n\u003cp\u003eThis model uses a 12-gauge, 10-foot extension cord rated for 15A\/125V (1875W) with a three-pin NEMA 5-15P plug, making it better suited for heavier loads than typical consumer strips. The thicker copper conductors reduce voltage drop and lower the risk of overheating under sustained loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 AWG cable for improved current capacity and durability\u003c\/li\u003e\n  \u003cli\u003e10 ft length gives flexible placement in larger work areas\u003c\/li\u003e\n  \u003cli\u003eThree widely spaced sockets accommodate bulky plugs and adapters\u003c\/li\u003e\n  \u003cli\u003eHigh-amp cord construction resists tripping and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mount this on a wall or under a bench?\u003c\/h3\u003e\n\u003cp\u003eYes — the CCCEI power strip is designed with screw-mount points for secure wall or workshop installation so you can keep outlets visible and accessible rather than tucked under furniture. Mounting reduces clutter, prevents cord snags and places switches within easy reach.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-drilled mounting holes for screws or anchors\u003c\/li\u003e\n  \u003cli\u003eSturdy aluminum and ABS housing for long-term use\u003c\/li\u003e\n  \u003cli\u003eWall-mounted position avoids floor hazards and debris\u003c\/li\u003e\n  \u003cli\u003eSwitch placement allows quick local control of each outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and certification details should I know?\u003c\/h3\u003e\n\u003cp\u003eThe strip is ETL listed (5019543) and uses fire-resistant ABS combined with a thickened aluminum casing for durability and improved heat resistance. It also incorporates overload protection via circuit breakers and recommends unplugging during extreme storms for maximum device safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eETL listed for recognized safety standards\u003c\/li\u003e\n  \u003cli\u003e20A circuit breakers protecting each switch\/outlet\u003c\/li\u003e\n  \u003cli\u003eABS fire-resistant materials and reinforced aluminum shell\u003c\/li\u003e\n  \u003cli\u003eRecommended to disconnect sensitive electronics during severe weather\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The CCCEI 3-outlet heavy duty surge protector fits homeowners, hobbyists and professionals who need a compact, durable power solution in garages, workshops, and utility rooms. It’s aimed at users who require individually switched outlets, a long, high-gauge cord for heavy tools or multiple adapters, and a mountable, rugged housing for organized, safer power distribution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cord gauge strong enough for power tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 12-gauge cord supports heavier-draw tools and reduces heat and voltage drop compared to thinner extension cords.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mount this on a wall or under a bench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit includes screw-mount points for secure wall or workbench installation for easier access and safer placement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CCCEI","offers":[{"title":"Default Title","offer_id":48413663035549,"sku":"B0G8FW964S","price":54.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/cccei-front-view-3-outlet-power-strip.jpg?v=1781277429","url":"https:\/\/nexoltic.com\/products\/cccei-3-outlet-20a-heavy-duty-surge-protector","provider":"Nexoltic","version":"1.0","type":"link"}