{"product_id":"buyuneed-tinned-copper-braid-shielding-sleeve-5-16-x28ft","title":"BuyUneed Tinned Copper Braid Shielding Sleeve 5\/16 x28ft","description":"\u003cp\u003e\u003cstrong\u003eBuyUneed tinned copper braid is a flexible, 5\/16\" wide metal cable shielding sleeve and ground strap designed to shield cables, reduce interference, and provide durable mechanical protection for wiring runs up to 28 ft.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re organizing ham radio gear, protecting automotive wiring, or preventing pets from chewing cables, this flat mesh braid offers a conductive, expandable cover that both shields against electromagnetic noise and serves as a practical ground strap. Made from many fine 0.12 mm tinned copper wires woven into a dense braid, the sleeve balances electrical conductivity with softness and flexibility so it can be cut, stretched, and fitted for many installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this braid improve signal stability and reduce interference?\u003c\/h3\u003e\n\u003cp\u003eThe tinned copper braid acts as a conductive shield that surrounds cables and equipment grounding points, helping to block or redirect electromagnetic interference away from sensitive conductors. It’s suitable for short bonding runs to a ground bus and for wrapping cable bundles where interference could degrade audio, radio, or data signals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDense tinned copper weave for EMI\/RFI attenuation\u003c\/li\u003e\n  \u003cli\u003eContinuous conductive path for grounding applications\u003c\/li\u003e\n  \u003cli\u003eWorks with audio, radio, and low-voltage signal lines\u003c\/li\u003e\n  \u003cli\u003eCan be bonded to chassis or ground bus bars for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the braid as a ground strap or bonding conductor?\u003c\/h3\u003e\n\u003cp\u003eYes — the braided tinned copper can be used to bond equipment to a ground point or as a flexible ground strap between nearby devices. For reliable grounding, choose appropriate terminations and keep runs short; the braid’s flexibility makes it easy to conform to tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for short bonding runs to ground bus bars\u003c\/li\u003e\n  \u003cli\u003eCompress or fold ends for terminal attachments\u003c\/li\u003e\n  \u003cli\u003eTrim to length and protect frayed ends with solder or heat-shrink\u003c\/li\u003e\n  \u003cli\u003eIdeal for ham radio station shielding and chassis bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I fit, cut, and secure the flat mesh without fraying?\u003c\/h3\u003e\n\u003cp\u003eThe braid stretches open to accept connectors and cables, then returns to a snug profile. Because the weave can fray when cut, prepare the ends by tinning, applying adhesive-lined heat-shrink, or using a solder sleeve to maintain mechanical integrity and conductivity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut with sharp shears and immediately apply solder or heat-shrink\u003c\/li\u003e\n  \u003cli\u003eScrunch open to pass over plugs, then pull back for a tight fit\u003c\/li\u003e\n  \u003cli\u003eWatch assembly videos or practice on scrap pieces for neat results\u003c\/li\u003e\n  \u003cli\u003eUse copper crimp or lug terminations for secure grounding points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this braid durable enough to protect cables from wear and pets?\u003c\/h3\u003e\n\u003cp\u003eThe tinned copper mesh doubles as an anti-chafe sleeve that resists abrasion and discourages chewing, while remaining flexible enough to route through confined spaces. It provides mechanical protection without significantly increasing bundle diameter when properly sized.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin, expandable mesh minimizes added bulk\u003c\/li\u003e\n  \u003cli\u003eProtects against rubbing, scuffing, and light mechanical wear\u003c\/li\u003e\n  \u003cli\u003eUseful as a pet-deterrent outer layer over vulnerable cables\u003c\/li\u003e\n  \u003cli\u003eChoose correct width\/ID to avoid excess stiffness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, hobbyists, and tinkerers who need a flexible, conductive shielding and grounding solution will benefit most: ham radio operators, audio technicians, automotive electricians, and homeowners safeguarding cables from pets or abrasion. If you need a 5\/16\" wide (0.20\" diameter) expandable mesh that can be cut to length and used for short grounding runs, EMI reduction, or cable protection up to 28 ft of continuous supply, this BuyUneed tinned copper braid is a practical, hands-on tool for many wiring projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I solder the braid to make a secure ground termination?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Tinning or soldering the cut end and using a lug or heat-shrink sleeve creates a reliable conductive termination.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sleeve stop pets from chewing cables?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It deters chewing and protects against abrasion, but extremely persistent animals may still damage cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BuyUneed","offers":[{"title":"Default Title","offer_id":48412777808029,"sku":"B09ZQTZ3ZL","price":44.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/buyuneed-front-packaging-braid.jpg?v=1781248303","url":"https:\/\/nexoltic.com\/products\/buyuneed-tinned-copper-braid-shielding-sleeve-5-16-x28ft","provider":"Nexoltic","version":"1.0","type":"link"}