{"product_id":"blafili-car-bluetooth-5-2-receiver-aptx-adaptive","title":"blafili Car Bluetooth 5.2 Receiver aptX Adaptive","description":"\u003cp\u003e\u003cstrong\u003eblafili CAR is a compact hideaway Bluetooth 5.2 receiver that adds high-quality wireless music (aptX Adaptive\/HD\/AAC\/SBC) to 12V or 24V vehicle audio systems via stereo RCA output.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want modern wireless streaming in a classic car, truck, boat, or powersport vehicle without changing the dash look, the blafili CAR delivers stable Bluetooth 5.2 connectivity, premium codecs, and an audio-activated remote trigger in a small weather-resistant package. It uses a Qualcomm QCC3040 chipset for reliable range and low latency and is built for installs that keep original interiors intact. The unit is designed specifically for music streaming (no microphone), and it integrates with systems that expect RCA line-level input and a remote turn-on signal for an external amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this receiver behave with vehicle power and ignition?\u003c\/h3\u003e\n\u003cp\u003eThe blafili CAR requires both the constant +12V\/+24V power wire and the ACC\/ignition wire to be connected for normal operation; the ACC input controls whether the device turns on with the ignition. If you prefer the unit to remain powered whenever battery voltage exists, you can jumper the ACC wire to the constant power wire. The product includes an in-line fuse for basic protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires yellow (+12V\/24V) and red (ACC) wires connected to power on.\u003c\/li\u003e\n  \u003cli\u003eCan be wired so it powers whenever battery voltage is present by joining red to yellow.\u003c\/li\u003e\n  \u003cli\u003eIncludes in-line fuse to guard against power surges during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat audio performance and codecs does it support?\u003c\/h3\u003e\n\u003cp\u003eDesigned for high-fidelity streaming, blafili CAR supports aptX Adaptive, aptX HD, aptX, AAC and SBC so you can pair modern phones and players for improved audio over standard Bluetooth. AVRCP support enables basic media control from head units or steering-wheel remotes when supported by the vehicle. The RCA outputs deliver clean line-level audio to aftermarket amplifiers or powered speakers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQualcomm QCC3040 chipset for stable Bluetooth 5.2 connection and low latency.\u003c\/li\u003e\n  \u003cli\u003eSupports aptX Adaptive\/HD\/aptX, AAC, SBC and AVRCP for better audio and control.\u003c\/li\u003e\n  \u003cli\u003eStereo RCA outputs for direct connection to amplifiers or aftermarket radios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the remote trigger and audio activation work?\u003c\/h3\u003e\n\u003cp\u003eThe blue remote output wire is audio-activated: it supplies a turn-on signal only while Bluetooth audio is playing, which helps conserve power and prevent unnecessary amp idle. Because it responds to audio, short pauses or spoken navigation prompts may drop the trigger; continuous amplifier power should come from a vehicle-switched source if required. This behavior is ideal for systems that can tolerate a remote-on tied to music playback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlue wire provides a remote turn-on only during active audio playback.\u003c\/li\u003e\n  \u003cli\u003eNot intended to keep an amplifier on through silent gaps or pauses.\u003c\/li\u003e\n  \u003cli\u003eFor continuous amp power, use a separate vehicle-controlled turn-on circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it rugged enough for boats, motorcycles, and all-weather installs?\u003c\/h3\u003e\n\u003cp\u003eYes — the blafili CAR is rated IP65, making it resistant to dust and water spray, so it’s suitable for marine and powersport use when installed in protected locations. Its compact design fits behind panels, under seats, or in trunks, preserving vintage interiors while adding modern streaming capability. Pairing is straightforward for both Android and iOS devices via Bluetooth A2DP.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 water and dust resistance for harsher environments.\u003c\/li\u003e\n  \u003cli\u003eSmall form factor for hidden mounting behind dash or under seats.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Android and iOS devices over Bluetooth A2DP and AVRCP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: blafili CAR is aimed at car, truck, motorcycle and marine owners who want to upgrade audio to wireless streaming without altering classic dashboards or replacing factory radios. Installers and DIY enthusiasts who need a compact, codec-rich Bluetooth receiver with audio-activated remote control and 12V\/24V flexibility will appreciate this unit’s stability, codec support, and hidden-mount design. Note: it streams music only and does not support phone calls or hands-free microphones.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does blafili CAR support hands-free phone calls?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. blafili CAR is music-streaming only and has no microphone or call functionality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the receiver turn on without the ACC wire connected?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: By default no — the ACC wire must be connected. You can tie ACC to constant power to keep it always on.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"blafili","offers":[{"title":"Default Title","offer_id":48436811366557,"sku":"B0F7KGX7QQ","price":63.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/blafili-car-front-panel-compact-receiver.jpg?v=1781455668","url":"https:\/\/nexoltic.com\/products\/blafili-car-bluetooth-5-2-receiver-aptx-adaptive","provider":"Nexoltic","version":"1.0","type":"link"}