{"product_id":"alitove-12v-5a-power-adapter-60w-dc-led-cctv-driver","title":"ALITOVE 12V 5A Power Adapter 60W DC LED\/CCTV Driver","description":"\u003cp\u003e\u003cstrong\u003eThe ALITOVE 12V 5A (60W) power adapter 2-pack converts 100–240V AC to a stable 12V DC supply for LED strips, CCTV cameras and other 12V devices that draw up to 5 amps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis dual-pack of ALITOVE AC-to-DC adapters delivers a steady 12V output at up to 5A (60W) per unit, making it a convenient replacement or backup power source for a wide range of small electronics. Each adapter accepts 100–240V AC input and includes common DC barrel plug compatibility; protection features such as over-voltage, over-current, short-circuit and over-temperature safeguards provide layered protection for your equipment. The units meet FCC and CE standards and are intended for indoor use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this adapter power my LED strip or CCTV camera?\u003c\/h3\u003e\n\u003cp\u003eYes, if your device requires 12 volts DC and draws less than or equal to 5 amps, this adapter will provide the necessary power. For continuous reliability, aim to use the adapter at no more than about 80% of its maximum capacity to reduce heat and extend lifespan.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for LED strips, CCTV cameras, DVR\/NVR systems and audio amplifiers under 60W\u003c\/li\u003e\n  \u003cli\u003eStable 12V output protects sensitive electronics from voltage swings\u003c\/li\u003e\n  \u003cli\u003eRecommended continuous load: up to ~4A (about 80% of 5A) for longevity\u003c\/li\u003e\n  \u003cli\u003eIndoor-only use — keep away from moisture and extreme temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm plug and polarity compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe adapter ships with a common barrel connector specified as 5.5 x 2.5 mm and is also compatible with 5.5 x 2.1 mm jacks. Before connecting, verify your device's power socket size and polarity marking — this unit uses center positive (inside \"+\", outside \"-\").\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBarrel size: 5.5mm outer, 2.5mm inner — fits many 5.5x2.1mm ports\u003c\/li\u003e\n  \u003cli\u003ePolarity: center-positive (inside +, outside −) — confirm with device label\u003c\/li\u003e\n  \u003cli\u003eIf unsure, check device manual or measure with a multimeter before connecting\u003c\/li\u003e\n  \u003cli\u003eDo not force incompatible plugs; adapter damage or device failure can occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety protections and certifications are included?\u003c\/h3\u003e\n\u003cp\u003eEach ALITOVE adapter includes automatic protection against overloads, over-voltage, over-current, over-temperature and short circuits to reduce risk to connected devices. The units comply with FCC and CE safety standards and follow RoHS environmental restrictions for safer materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in overload and short-circuit protection to shut down under fault conditions\u003c\/li\u003e\n  \u003cli\u003eOver-temperature and over-voltage safeguards to protect both adapter and device\u003c\/li\u003e\n  \u003cli\u003eMeets FCC, CE certifications and RoHS environmental standards\u003c\/li\u003e\n  \u003cli\u003eDesigned for indoor electrical environments only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right adapter placement and load management?\u003c\/h3\u003e\n\u003cp\u003ePlace the adapter in a ventilated area to allow heat to dissipate and avoid stacking multiple power bricks. Match the adapter to devices with combined current draw below the 5A limit for each adapter, and consider using one adapter per device rather than daisy-chaining high-load systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep adapters on open surfaces with airflow — avoid enclosed cabinets\u003c\/li\u003e\n  \u003cli\u003eUse separate adapters for high-power devices or distribute load across both units\u003c\/li\u003e\n  \u003cli\u003eCheck device current draw labels or specifications before pairing\u003c\/li\u003e\n  \u003cli\u003eUnplug during storms or when not in use for extended periods for added safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ALITOVE 12V 5A 60W adapter 2-pack is aimed at hobbyists, installers and homeowners needing reliable indoor power for 12V systems like LED lighting, CCTV, small amplifiers, routers and other electronics under 5A. Choose this kit when you want a cost-effective spare or replacement set with common barrel-plug compatibility, multiple safety protections and wide AC input support for worldwide use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one adapter power multiple devices at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if the total current draw stays at or below 5A; splitting a high-load system across adapters is safer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the adapter compatible with 5.5x2.1mm jacks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 5.5x2.5mm plug is compatible with most 5.5x2.1mm jacks; confirm center-positive polarity first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ALITOVE","offers":[{"title":"Default Title","offer_id":48412802154653,"sku":"B0C776KMTT","price":35.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/alitove-front-view-adapter-2pack.jpg?v=1781249400","url":"https:\/\/nexoltic.com\/products\/alitove-12v-5a-power-adapter-60w-dc-led-cctv-driver","provider":"Nexoltic","version":"1.0","type":"link"}